Inspection Equipment List
Inspection System per MIL-I-45208 - Calibration per MIL-STD-45662
| NAME |
QTY |
DESCRIPTION |
ACCURACY |
| Gage Blocks - Inch |
1 |
81 pc. Set - Master Gages |
Grade 3 |
| Gage Blocks - Inch |
2 |
81 pc. Set - Transfer Gages |
Grade 3 |
| Gage Blocks - MM |
1 |
48 pc. Set - Master & Transfer |
Grade 3 |
| Super Micrometer |
2 |
Pratt & Whitney-Electronic |
0.000,020 |
| Optical Comparator |
2 |
J&L PC-14A & Micro-VU-10" |
To ±0.0001 |
| Meas. Microscope |
2 |
Mitutoyo - 4 in. x 2 in. Travel |
0.0001 |
| Profilometer |
1 |
Taylor - Hobson Surtronic 3 |
± 2% of Reading |
| Electr. Amplifier |
1 |
Brown & Sharpe - 5 Ranges In/MM |
To 0.000,001 |
| Test Indicators - Inch & Metric |
11 |
Assorted type & ranges |
To 0.000,050in/0.002MM |
| Travel Indicators |
12 |
To 4 in. travel |
To 0.0001 |
| Precison Hole gages with Master setting fixtures |
4 |
Sunnen - Range 0.370-3.000 in. |
0.000,025 |
| Federal Air Gage |
8 |
Prec. bore insp. wide assortment of Master rings and probes |
0.000,050 |
| Dial Bore Gates |
3 |
Sunnen - Range 0.495-2.000 in. |
0.0001 |
| Height Gages |
3 |
Range 24in/300MM |
0.0001 in./0.001MM |
| Height Transfer |
1 |
Range 0-12in. |
0.0001 |
| Hand Held Micromenter - inch/MM |
40 |
9 types (disc, anvil, depth, etc.) Range 0-8in./0-50MM |
To 0.0001 in./0.002MM |
| Indicator Mics. |
4 |
O.D. Type - Range 0-2 in./25-20MM |
0.000,050 in./0.002MM |
| Surface Plate |
8 |
Largest 36 in. x 48 in. |
"A" - (insp) |
| Thread Ring Gages |
221 |
Smallest 0-80 - Largest 1 ¾-8 |
Per gage standard |
| Thread Plug Gages |
264 |
Smallest 0-80 - Largest 2 ¾-12 |
Per gage standard |
| Thread Set Plugs |
72 |
Smallest 0-80 - Largest 1 5/16-12 |
Per gage standard |
| Cylindrical Plug Gates |
1500
700
1950 |
0.011-1.00 - every thousandth
0.0505-0.7505 every thousandth
78 set Deltronic |
± 0.000,050
± 0.000,050
+ 0.000,040/-000,0 |
| Thread Wires |
51 sets |
6 through 80 pitch |
Within 0.000,010 of best wire size |